Today, I would like to share my impressions from the Umsetzungsforum Industrie 4.0, which took place ten days ago at the Produktionstechnisches Zentrum Berlin. The event was organized and hosted by Prof. Dr. Henning Kagermann, President of the acatech working group, and Dr. Siegfried Dais, Co-President  of the acatech working group and Deputy Chairman of the Board of Management at Robert Bosch GmbH. Many well-known figures from the political and economic scene were also in attendance. The impressive building was a great platform to foster the discussion and reflection about the next revolution in production.

Dr. Siegfried Dais, Ernst Burgbacher, Dr. Georg Schütte, and Prof. Dr. Henning Kagermann

Dr. Siegfried Dais, Ernst Burgbacher, Dr. Georg Schütte, and Prof. Dr. Henning Kagermann at the official presentation of the strategic recommendations to the German Government.
Source: acatech/D. Ausserhofer

Since January 2012, the acatech working group has been analyzing how the Internet of Things can positively affect industry production. I was part of the team with a focus on technology. Based on this research, they have developed work streams for applied research and the industry sector. All results collected over the past 9 months have now been combined into a strategic recommendation. At this event, the strategic recommendations were officially given to Dr. Georg Schütte (Parliamentary Secretary of the BMBF) and Ernst Burgbacher (Member of the German Parliament and Parliamenary Secretary of the BMWi) representing the German Government.

A quick excursion – Industry 4.0

Working cycles in a Smart Factory

Collaborative interactions in a Smart Factory
Source: Trumpf / Forschungsunion Wirtschaft & Wissenschaft

Industry 4.0, a term shaped by representatives of German industry leaders, researchers, industry association, and unions, describes how the Internet of Things will drastically improve the industry’s engineering, production, logistic and life cycle management processes. The number refers to the 4th industrial revolution. Starting in the 18th century, 3 major waves of technical changes modified the industrial landscape and increased productivity. The Internet of Things allows for a new way of organizing industry production: by connecting machines, warehousing systems, and goods, we can create smart production systems that basically control each other without requiring any manual intervention. We have also recently posted a blog article which explains the effects of industry 4.0 and possible scenarios.

Why is this topic so important for Germany?

Manufacturing industry - An international comparison

International comparison of the manufacturing industry
Source: OECD; IW Cologne / Forschungsunion Wirtschaft & Wissenschaft

The manufacturing sector forms, with a trade surplus of over 100 billion Euro in 2011, the spine of the German economy and is, among other things, the reason for Germany’s solid position in the global economy. Industry 4.0 offers Germany the chance to maintain this position and allows them to stay competitive. Using smarter production systems, the industry will be able to react to future market trends, such as more individualized and powerful products, while keeping costs at the same level and reducing time-to-market.

Dr. Siegfried Dais on Industry 4.0 and the Internet of Things

As a strong player in the Internet of Things and the Industry 4.0 market, Bosch plays a role as an active member in the acatech working group. That is why Mr. Dais presented the project results to the German Government and the audience. In an interview, Mr. Dais confirmed the relevance of this topic for the German industry and economy: “Our work showed that Germany possess all competences in the area of engineering and manufacturing to stay successful in a future world, characterized by the Internet of Things. The recommendations that were defined by the working group and represent their intense and constructive collaboration should be implemented soon with the support of the German politics.”

Stefan Ferber on the technology factor in Industry 4.0

In my presentation I highlighted the available Internet and Software technology, the German Industry can already apply today by orchestrating business processes. Hence, to connect factories and global value networks (and not value chains) the industry needs an open reference architecture to share data and to connect business process with Service Oriented Architectures (SOA). In order to design and implement such a reference architecture we need companies in multiple domains to agree on it. Therefore, the working group recommended working on this reference architecture and establishing it as a soft-standard in the Internet. For the production industry, the advantage of using a reference architecture is a faster and cheaper integration in the plant. Software companies benefit by being able to offer similar software to a bigger market while the engineering industry benefits by having access to a wider range of software offerings and easier integration with their existing business processes.

Combining the competence of IT companies with the competence of production and logistic companies will be a key success factor. To reach the Industry 4.0 goal however, we need more than today’s model abstractions for describing and operating machines, logistics, and production lines. “Coding” the production know how with modeling languages is a key and hard engineering job. But I personally think that this challenge of creating information models will attract the best engineers. We just have to give them the freedom to do so.

Concrete examples of Industrie 4.0 at Bosch

However, Mr. Dais and I did not only talk about future plans but also about concrete steps that the Bosch Group has already taken to realize Industry 4.0 concepts. Attendees had the chance to experience the potential of such Bosch solutions. Bosch Rexroth showcased a Cyber-Physical Production System, which independently controls required maintenance and repair services of 8 machines in the Bosch Feuerbach plant from Berlin or somewhere else in the world. If necessary this Remote Condition Monitoring (RCM) triggers all following processes automatically, e.g. ordering spare parts or informing technicians about further actions that have to be taken.

The Bosch Plant Homburg already connects multiple partners in the logistic value chain with a RFID-based Automotive Network. This solution was developed within the “RAN” Project and is in daily operation today.

Bosch Rexroth and Bosch Software Innovations are working on solutions to further automate production and manufacturing processes via internet technology based service portals.


This event, considering its scope and audience, described what an important role the Internet of Things will play in our future professional and everyday life. As we learned from Mr. Dais, Industry 4.0 is no longer a pipe dream but has already been realized in Bosch’s production plants and will consequently soon affect related companies and sectors.

Have you had any first experiences with Industry 4.0 projects or solutions? Which challenges do you see in preparing our industry for such a drastic change? We would love to get your thoughts on that topic!

About The Author

Stefan Ferber

I am Vice President for Portfolio Strategy at Bosch Software Innovations in Germany – the Bosch Group’s software and systems house. I also represented Bosch in the German “Industrie 4.0 Plattform” and am a member of the European “Internet of Things Council“. Here I leverage more than twenty years experience in software development, software processes, software product lines and software architectures for embedded systems, computer vision, and IT domains. Before I was Product Manager for the Bosch eMobility Solution and therefore engaged internationally in the eMobility market, business models, standardization, and technology topics in Europe, Asia, and Australia. I also acted as Director of Bosch Corporate Systems Engineering Process Group and a technical expert for software engineering and software architectures mostly for automotive embedded software. I hold a Ph.D. and a diploma degree in Computer Science from the University of Karlsruhe, Germany and a MSc. in Computer Science from the University of Massachusetts Dartmouth, USA.

10 Responses

  1. tamberg

    Hi Stefan,

    Great collaborative interactions image, especially that machines are represented as both, physical and “cyber”. We use a similar reference model to explain connected products, emphasizing the interactions (physical / virtual) and trying to show how the product, other Web services and the user are connected to / through the Internet

    Anyway, what I wanted to ask: is the mentioned presentation available online somewhere?

    Kind regards,

  2. Stefan Ferber


    great reference model. I really like the sketching approach, I also try to use it for “future thinking on things” e.g.

    The final acatech report “Industrie 4.0″ will be published at the Hannover-Messe in March 2013. The only report that is puplic available is the work plan for this group here:

    So stay tuned or let’s meet in Hannover next year.


  3. Selina Iddon

    The acatech working group has been analyzing how the Internet of Things & Services can positively affect industry production. I was part of the team with a focus on technology. Based on this research, they have developed work streams for applied research and the industry sector.

  4. Stefan Ferber

    thanks a lot for your perspective. Just recently acatech has started a dedicated web-page:
    There you can download the pictures from the event and the report. Now we contiune to write the final version of the report until the next Hannover-Messe 2013. This report will focus less on the research and more on the industry related topics.

  5. Thiago daLuz

    Hohoho, that’s great to hear. I wondered for a while how long it’d be before Deutschland would start coming out of its shell. I can keep an eye on these industries, working with hydraulic manifolds helps me stay savvy, though I’m not nearly so knowledgeable as the folks around here.

  6. Stefan Ferber

    do you think that Germany is behind the innovation power compared to the USA? What does your company do on this topic?

    The Hannover Fair last week was full of references regarding “Industry 4.0″. The Industry platform has been lauched also
    Most of the web-page is in German but the report is also available in English. Just download here:


  7. Md. Abu Bakar Siddik

    Dear Stefan,
    Do you have any report of Industry 4.0 in English?Actually I have a presentation on it and as it is new so i didnt find any papers on internet about this from where I can understand this topic easily.So please help me.
    Thanx in advance.


Leave a Reply

Your email address will not be published.